Operation Steps And Precautions Of Escalator Cleaning Machine

Escalators are also escalators in shopping malls and supermarkets. Consumer oriented places must provide a comfortable and clean environment in order to give consumers a desire to shop. If you want to keep the escalator clean and dust-free for a long time, you must choose the appropriate cleaning and cleaning equipment and master the correct operation method to make the escalator cleaner as new.

The escalator cleaning machine is an important sanitation and cleaning equipment for large supermarkets, property companies, and housekeeping companies. Today, we will take everyone to the escalator cleaning machine to learn about the related operation methods of the escalator cleaning machine.

Cleaning method:

The escalator cleaning machine uses the roller brush to drive the dust in the gap between the escalator pedal, and cooperates with the vacuum motor to suck the dust and garbage on the ladder surface into the dust bag.

Cleaning steps:

1) Open the dust box and confirm that the dust bag and the filter are installed in place.

2) Pull the machine to the entrance of the escalator to ensure that no pedestrians are walking up and down the escalator when working.

3) Machine placement requirements: 

When the automatic step ladder is running upwards, the step ladder cleaning machine must be placed on the step ladder for cleaning. When the automatic step ladder is running down, the step ladder cleaning machine must be placed under the step ladder to clean.

4) Push the roller brush and suction part of the machine to the escalator plane. After the machine is placed steadily, start the dust suction and roller brush switch, and the equipment will work.

5) The cleaning time for each escalator is around 15 minutes

6) After cleaning, turn off the power, cut off the power, and pull the machine back out of the pedal plane to complete the cleaning.

Operation precautions:

1) Before each cleaning operation, start the switch idling to ensure that the rolling brush of the equipment rotates without abnormality, and the dust suction motor is abnormal before the operation can be carried out.

2) After cleaning, clean up the dirt on the dust bag and the windings on the roller brush to avoid affecting the normal operation of the roller brush. Vacuum sea paws need to be cleaned regularly, and use a vacuum cleaner to suck up the dust. If the frequency of use is high, the Haidian filter, dust bag and roller brush need to be replaced regularly.

3) The machine is a sweeping and vacuuming device and cannot be used for vacuuming. If there is liquid on the escalator, it must be cleaned before using the device.

4) Escalators are very dusty, and dust bag rolling and cleaning must be carried out after each operation to ensure that they are clean. If there is any abnormality, check the roller brush motor and dust suction motor for signs of foreign matter blockage or belt wear.

5) During the inspection, the equipment must be disconnected from the power cord, kept in a power-off state, and not inspected under power.

For more related models, technical parameters, maintenance knowledge, and prices of escalator cleaning machines, please pay attention to Henan Pivot Machinery Co.,Ltd for understanding.