What Should I Do If The Scrubber Is Not Clean?

What should I do if the scrubber is not clean?

1. Reasons for flashing

Take off the scrubber of the scrubber to see the wear of the scrubber (if you use a scrubbing pad to remove the needle seat), if you change the brush disc when the length of the bristles is less than 1.5cm. When the scrubbing pad wears to 1.0cm, please exchange a new scrubbing pad. If there is too much oil on the floor, please participate in an appropriate degreasing agent, which can effectively remove the oil stain.

2. The reason for the squeegee

1. Check whether there is residue in the squeegee strip of the scrubber, and clean it up in time.

2. Check whether the squeegee rubber strip is damaged. After the damage, it will affect the sealing, resulting in incomplete water absorption and uncleanness.

3. Check the unevenness and parallelism of the squeegee and the ground. The adjusted squeegee should fall parallel to the ground and be symmetrical. If not, please adjust the angle of the squeegee. Regarding the correct application, the squeegee should adjust its height according to the wear of the rubber strip; during the cleaning process, the rear rubber strip should be bent back 5mm in its length direction.

4. Check whether the suction motor switch has been turned on

We are a professional cleaning equipment manufacturer and supplier. Our products mainly include sweepers, scrubbers, carpet sweepers, snow blowers and other products. If you have any cleaning needs, please feel free to contact me! 

Email: wendy@pivotcleaningmachine.com

Whatsapp/Wechat: +8615903873562